Start by cleaning your feet before you begin. Then, pick your required intensity roller head and insert it into the device. Ultra coarse roller head, for the toughest hard skin or Extra coarse roller head for particularly thick and stubborn hard skin – both with Diamond Crystals. Or choose from two roller heads enriched with Marine Minerals for lighter levels of hard skin - Regular coarse roller head for excess hard skin on the foot and Gentle coarse roller head for more delicate skin.
To get started make sure you have removed the plastic covering above the four AA batteries and switch your Electronic Foot File on. This should start the roller spinning and with an integrated safety stop, it’s safe and gentle. Now you can allow the roller to move slowly over the areas of dry skin that you want to remove from your feet. Try not to push down too hard against the skin, although there is a built-in safety mechanism that stops the roller from spinning if you accidentally do. Do not to hold it in the same place for longer than 3-4 seconds.
When you have treated all the hard skin areas, and your feet are starting to feel smoother, switch off your Electronic Foot File and rinse your feet to remove any excess hard skin. To complete the pedicure routine, try applying the Velvet Smooth™ intense serum. The serum is also perfect to use after the Electronic Foot File as it contributes to maintaining the moisture balance in the skin.
To clean your Electronic Foot File, when you are finished, make sure it is first turned off and then push the button on the side to remove the roller head, the roller head can be rinsed under a tap. To clean the rest of the device, wipe it over with a moist cloth and when both are clean and dry, you can reassemble them.
Store your Electronic Foot File somewhere safe ready to be used again next time!