Start by cleaning your feet, washing and thoroughly drying them before you begin. Then, pick your required intensity roller head and insert it into the device – Gentle coarse: for the gentle removal of hard skin and perfect finish, Regular coarse for normal hard skin, Extra coarse for very hard skin and Ultra coarse for the toughest hard skin and a perfect finish.
To get started make sure you have already inserted the four AA batteries and switch your Express Pedi on. This should start the roller spinning and with an integrated safety stop, it’s safe and gentle. Now you can allow the roller to move slowly over the areas of dry skin that you want to remove from your feet. Try not to push down too hard against the skin, although there is a built in safety mechanism that stops the roller from spinning if you accidentally do. Do not to hold it in the same place for longer than 10 seconds.
When you have treated all the hard skin areas, and your feet are starting to feel smoother, switch off your Express Pedi and rinse your feet to remove any excess dry skin. To complete the pedicure, apply Velvet Smooth™ intense serum. The serum is also perfect to use after the Express Pedi as it contributes to maintaining the moisture balance in the skin.
Whenever you find more time during the week, or when your feet require a top up – we recommend using a velvet smooth essential moisture cream. The cream soaks in within 60 seconds, it’s not greasy and it’s ideal for a daily application in the morning.
To clean your Express Pedi, when you are finished, make sure it is first turned off and then push the button on the side to remove the roller head, this can be rinsed under a tap. To clean the rest of the device, wipe it over with a moist cloth and when both are clean and dry, you can reassemble them.
Store your Express Pedi away somewhere safe ready to be used again next time!